Menu Close

Gateway PROFIBUS para CANopen
GW-7553-CPM

Conecte dispositivos CANopen à rede PROFIBUS DP. utilizando o Gateway PROFIBUS para CANopen GW-7553-CPM

  • Protocol & Hierarchy : DP-V0 Slave
  • Supports CANopen Standard : CiA CANopen Standard DS-301 v4.02
  • Supports CANopen Consumer protocol : Node Guarding and Heartbeat Consumer protocol
  • Number of CANopen Commands : Support 110 CANopen SDO/PDO commands
  • Protocol & Hierarchy : DP-V0 Slave

Gateway PROFIBUS para CANopen GW-7553-CPM

O Gateway PROFIBUS para CANopen GW-7553-CPM foi projetado para conectar rapidamente dispositivos CANopen à redes e controladores com protocolo PROFIBUS DP.

Permite que o mestre PROFIBUS acesse os dispositivos escravos CANopen. Também fornecemos o software utilitário para os usuários configurarem o GW-7553-CPM.

Ao utilizar este módulo, os usuários podem colocar seus dispositivos CANopen na rede PROFIBUS com muita facilidade.

 

PROFIBUS to CANopen Gateway

 

Destaques Gateway PROFIBUS para CANopen GW-7553-CPM

  • Protocol & Hierarchy : DP-V0 Slave
  • Supports PROFIBUS Transmission Rate (Kbps) : 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
  • Transmission Rate Setting : detected automatically
  • Max Input Data Length : 240 Bytes
  • Max Output Data Length : 240 Bytes
  • PROFIBUS Address Setting : 0~126 set by DIP switch
  • Supports CANopen Standard : CiA CANopen Standard DS-301 v4.02
  • Supports CANopen Consumer protocol : Node Guarding and Heartbeat Consumer protocol
  • Number of CANopen Commands : Support 110 CANopen SDO/PDO commands
  • COM : RS-232
  • Indicators : PWR, ERR, and RUN LEDs
  • Network Isolation Protection : 2500 Vrms High Speed iCoupler
  • DC Isolation Protection : 3000VDC on PROFIBUS side
  • Protocol & Hierarchy : DP-V0 Slave

 

CPU Module
CPU 80186, 80 MHz or compatible
EEPROM 16 KB
Flash 512 KB
SRAM 512 KB
Watchdog Timer Watchdog IC
CPU built-in
LED Indicators
Status PWR LED, RUN LED, ERR LED
COM Ports
Ports RS-232 (For updating firmware and configuration)
3-pin screwed terminal block (RxD, TxD, GND)
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity None, Even, Odd
Data Bit 7, 8
Stop Bit 1, 2
CAN
Controller NXP SJA1000T with 16 MHz clock
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Specification CANopen DS-301 ver4.02
PROFIBUS
Controller Profichip VPC3+C
Transceiver ADI ADM2486
Baud Rate 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol DP-V0
Power
Consumption 2.5 W
Mechanical
Dimensions (mm) 72 x 33 x 119 (W x L x H)
Installation DIN-Rail
Environmental
Operating Temperature -25 ~ +75℃
Storage Temperature -30 ~ +85 ℃
Humidity 5 ~ 95% RH, Non-condensing